|
rcbench
Servo and ESC test bench: panel, IOmcu and shared C
|
A pad that is not a pin: a ground, a rail, or neither. More...
#include <out_bind.h>
Data Fields | |
| uint8_t | pad |
| uint8_t | kind |
| uint8_t | decivolts |
| Tenths of a volt. Zero on a rail means it is not a fixed voltage – an input follows whatever feeds it – and is not the same as 0V, which is what a ground is. | |
A pad that is not a pin: a ground, a rail, or neither.
A servo lead has three wires and the catalogue describes one. Somebody who has found where the signal goes still needs a ground for the return and a rail for the positive, and counting pads to find them is how a lead ends up in the wrong place.
| uint8_t outbind_pad_t::kind |
| uint8_t outbind_pad_t::pad |
the number printed on the board