|
| | bench_state.c |
| | The decoding, peaks and totals of the bench readings, see bench_state.h.
|
| | endpoints_link.c |
| | The panel's half of the throttle's pulse endpoints.
|
| | hitec_card.c |
| | The text of the Hitec programmer's record of a write, and its parse. See hitec_card.h.
|
| | hitec_link.c |
| | The panel's half of the HITEC link page.
|
| | hitec_prog.c |
| | The programmer for servos by Hitec: the session driven through the link's task, the state the overlay draws and the messages it says. See hitec_prog.h.
|
| | hitec_prog_int.h |
| | The seam between hitec_prog.c, the session's driving, and hitec_prog_write.c, the edits, writes and the record.
|
| | hitec_prog_write.c |
| | The write side of the programmer for servos by Hitec: the draft and its edits, the soft rules and their confirmations, the write switch, the writes, and the record of a write. See hitec_prog.h.
|
| | hitec_rx_link.c |
| | The panel's half of the Hitec receive mode.
|
| | knob.c |
| | The poll transactions and the angle steps of the rotary knob, see knob.h.
|
| | kst_card.c |
| | The card's side of the servo programmer's files.
|
| | kst_link.c |
| | The panel's half of the KST link page.
|
| | kst_prog.c |
| | The state of the programmer for KST and Chaservo servos: see kst_prog.h.
|
| | kst_prog_card.c |
| | The programmer's files on the card: the save, the list and the load of kst_prog.h as the state sends them and takes their answers back.
|
| | kst_prog_file.c |
| | The programmer's journal file: the text of a write to the servo that survives a restart of the panel, and the parse of it.
|
| | kst_prog_int.h |
| | The programmer's private seam between kst_prog.c, kst_prog_card.c and kst_prog_file.c: the wait and file-write kinds the state holds, and the helpers of kst_prog.c that the card part and the journal file part call.
|
| | log_cadence.c |
| | The run log's cadence: which pass writes a row, see log_cadence.h.
|
| | log_cols.c |
| | The bench log's columns per watched target.
|
| | log_writer.c |
| | Writes a run as CSV rows to a sink, see log_writer.h.
|
| | panel_i2c.c |
| | The table of I2C addresses taken on the panel board's buses (panel_i2c.h).
|
| | perf_watch.c |
| | The frame window, the table of lows and the line schedule behind the panel's console lines (perf_watch.h).
|
| | prog_link.c |
| | The panel's side of the programming ports' page.
|
| | sense_limit_link.c |
| | SENSE_LIMIT, the panel's half. See sense_limit_link.h.
|
| | sense_link.c |
| | The panel's half of the SENSE, SERVO_SENSE and SERVO_WIN link pages.
|
| | sense_link_int.h |
| | What sense_link.c and sense_link_view.c share and nobody else sees: the set-up's frame layout, the status register index, and three names the two files cross.
|
| | sense_link_view.c |
| | The panel's half of the SENSE, SERVO_SENSE and SERVO_WIN link pages: what the last reads hold, handed to the screens, the log and the band – the servo windows, the meter, the ESC figures and totals, the encoder and the parts' addresses and identities – and the rows of SETUP the page does not hold.
|
| | sense_map_link.c |
| | The panel's half of the SENSE_MAP page.
|
| | sense_win_link.c |
| | SENSE_WIN_A and SENSE_WIN_B, read for the log.
|
| | servo_source.c |
| | Which meter measures the servo rail.
|
| | supply.c |
| | A programmable supply and its model.
|
| | supply_link.c |
| | The panel's half of the SUPPLY link page.
|
| | telemetry_sim.c |
| | The modelled pack, motor and propeller, see telemetry_sim.h.
|
| | tone_link.c |
| | The panel's half of the TONE link page.
|
1.18.0